1/25 Scale 1989 Patrick Racing Penske PC-18 - Indycals Waterslide Decal sheet

Product weight = 0.1 oz
See shipping rates tab above for cost.

Designed for the Classic Racing Resins 1989 Penske PC18 Trans-kit which you can buy HERE

Decal sheet will be fulfilled by Indycals and will be shipped separately by Indycals.

These Decals will be dropshipped from Indycals by USPS First Class International Letter Service there is NO TRACKING available for this service. Your decal order will ship separately from any order from Classic Racing Resins.

Decal Instructions:
These are waterslide transfer decals. NOT peel and stick. These are professionally printed. These are water transferable decals and work just like any other water transfer decals you would get with a model kit. One difference from kit decals is that the carrier film is not fit to each marking on the sheet - you need to carefully trim the decals as close to the printing as possible.

Decals are tailored for each car they are designed to replicate and the color background they go on. Ie, a decal designed to go on a white background probably won't work on a colored background.

Our decals can be clear coated. We have tested our decals with Testors Model Master Lacquer, Mr. Hobby Mr. Color lacquer 46 Clear and Tamiya TS13 clear lacquer. As lacquers and other non-water-based clear coats tend to be harsh, we recommend using setting solutions on the decals before clear coating (we recommend Solvaset) - this will help bond the decal to the paint and reduce the chances of wrinkling. Acrylic water-based clear coats should be safe. We have also tested Johnson's (Future) Floor Wax with no problems. Regardless of what you are using, it's always best to test first. If you need any scraps for testing your clear coat, just ask and I will send some along.

To apply decals carefully trim with a sharp Exacto knife. We recommend lightly cutting through the film - without going through the paper - to get the 'shape' of the decal and then doing a wider cut through the paper to avoid damaging the decal. Dip in water (warm water works quicker) for a few seconds. The decal will slide off – position on car. We do recommend setting solutions, particularly Solvaset, especially if you plan to clear coat.